In business since 1985. Online since 1994. We sincerely thank you for supporting family owned small businesses!
Give us a call from 8am to 6pm Mon-Fri. We are available to answer questions or to take your order.
(361) 645-3325
If you make this project please share your photos with us. If we use them on our website or on Facebook you will get 15% off of your next order over $25!
1. Pour a small amount of glue onto a disposable plate or piece of heavy paper.
2. Open safety pin and thread 5 e-beads onto the prong of each safety pin leaving room to refasten the pin.
3. Dip the end of the safety pin into the glue and fasten.
4. Cut 2 lengths of stretch jewelry cord, approximately 10" to 12" long. Slide one length of cord through the hole in the bottom of a finished safety pin, then through a mushroom bead, then through the hole in the head of the next safety pin. Continue stringing safety pins in this sequence until desired length. Securely tie the ends of the threaded stretch cord. Trim cord and tuck remaining ends back into the holes of the safety pins and secure with a spot of glue onto the inside of one of the safety pins.
5. Thread the second piece of stretch jewelry cord through the opposite end of each pin, including a mushroom bead between each pin making sure to string them in the same order as they are on the first cord. Knot securely, trim, tuck remaining ends into the safety pin holes and hold with a spot of glue in the inside of one of the safety pins.