Jewelry Dividers - Bracelet Connectors - Jewelry Spacer Bar

Flat spacer bar with two holes. 20 mm long, 7 mm wide, 2 mm thick. Perfect for keeping double strands separate.
* New Item! 

Flat spacer bar with three holes. 29 mm long, 6 mm wide, 2 mm thick. Perfect for keeping double strands separate.
* New Item! 

Flat spacer bar with 4 holes. 34 mm long, 6 mm wide, 2 1/2 mm thick. Perfect for keeping double strands separate.
* New Item! 

Stainless steel barrel tube end caps do not fade or chip making them ideal for long lasting, stronger jewelry designs. Inside hole is 3mm. Note: Manufacturer package shows 4.5mm by 8mm but we measured 4mm by 10mm. 10 pieces per package.

Stainless steel barrel tube end caps do not fade or chip making them ideal for long lasting, stronger jewelry designs. Note: Manufacturer package shows 5.5mm by 10mm but we measured 6mm by 10mm. 8 pieces per package.

Stainless steel barrel tube end caps do not fade or chip making them ideal for long lasting, stronger jewelry designs. Each cord end cap measures approximately 8mm wide by 12mm long. 6 pieces per package.

Gold Plated Steel bead pin. Ends unscrew to allow you to add beads or other items.

Clamshell calottes, also referred to as bead tip knot covers, give your jewelry project the perfect finishing touch. Thread your jewelry thread through the hole om the bottom and squeeze the clamshell closed. Use the loop to connect to your clasp or to a jump ring and squeeze closed.

Clamshell calottes, also referred to as bead tip knot covers, give your jewelry project the perfect finishing touch. Thread your jewelry thread through the hole om the bottom and squeeze the clamshell closed. Use the loop to connect to your clasp or to a jump ring and squeeze closed.

Clamshell calottes, also referred to as bead tip knot covers, give your jewelry project the perfect finishing touch. Thread your jewelry thread through the hole om the bottom and squeeze the clamshell closed. Use the loop to connect to your clasp or to a jump ring and squeeze closed.

Clamshell calottes, also referred to as bead tip knot covers, give your jewelry project the perfect finishing touch. Thread your jewelry thread through the hole om the bottom and squeeze the clamshell closed. Use the loop to connect to your clasp or to a jump ring and squeeze closed.

Chandelier style earring connector. Perfect to use as earring chandeliers or to use as jewelry connectors. 1-ring on one end and 3-rings on the other end. Piece measures 20mm long x 15mm wide. Add a clasp, beads, pendants, earring wire, bead string, stone or other charm to create your own unique jewelry piece.

Flat spacer bar with two holes. 10 mm long, 3mm wide. Perfect for keeping double strands separate.

Metal spiral shaped jewelry connectors with eye on each end.
Note: Package states 17mm x 10mm. We measure 16mm long x 10mm wide.

Big Value! Silver rectangle end caps. 120 pieces per package.

Flat spacer bar with two holes. 10 mm long, 3mm wide. Perfect for keeping double strands separate.

Flat spacer bar with 4-holes for jewelry making and other craft projects. 20mm long, 3mm wide.

Create earring dangles, bracelets, necklaces, and more with these decorative gold and lime green flower connector links. Each connector measures 14mm and features opaque, lime green dots set in gold. Design fun jewelry for any occasion with chain, cord, and other pieces in the Chic & Charmed jewelry collection. 4 pieces per package.

Design fun jewelry pieces for any occasion with these sweet heart connectors from the Chic & Charmed jewelry collection. Each faceted gold heart measures 18 x 16mm and has two loops for adding chain, cord, findings, and more. 4 pieces per package.

These gold, bezel set rhinestone jewelry connector links feature round, sparkling crystal rhinestones. Each decorative connector link measures 14mm and can be used to make pretty necklaces, earring dangles, bracelets, and more. Pair with other pieces in the Chic & Charmed jewelry collection to create elegant, handmade jewelry perfect for any occasion. 4 pieces per package.

Sparkling crystal rhinestones accent these bright gold hand jewelry connectors. Each hand measures 23 x 12mm and has two holes for connecting to chains, cord, findings, and more. 3 pieces per package.

Design elegant jewelry with these gold heart connectors embellished with sparkling crystal rhinestones. Each connector measures approximately 18 x 11mm and has two loops for connecting to chain, findings, cord, and more. Pair with other pieces in the Chic & Charmed jewelry collection to create pretty handmade jewelry for any occasion. 3 pieces per package.

These gold faceted round jewelry connector beads catch the light and shine just like a disco ball! Each package includes 12 each 8mm beads, 10mm beads and 12mm beads that each have two hooks for connecting to chain, findings, cord and more.

These crystal faceted round jewelry connector beads have a beautiful aurora borealis finish that catches the light and shines! Each package includes 8 each 8mm beads, 10mm beads and 12mm beads that each have two gold hooks for connecting to chain, findings, cord and more.

These crystal faceted round jewelry connector beads have a beautiful silver finish that catches the light and shines! Each package includes 11 - 8mm beads, 8 - 10mm beads and 5 - 12mm beads that each have two silver hooks for connecting to chain, findings, cord and more.

Perfect for necklace, earring, and bracelet making, these silver, circle-shaped jewelry connector links add a little bling and charm to your jewelry project. From chains to pendants, these versatile links are great for adding finishing touches. Featuring turquoise colored beads that line the full span of the link, these cool-toned jewelry pieces are perfect for adding textured enhancements. Each link measures 2 cm. 2 pieces per package.

These fun, silver anchor connectors from the Chic & Charmed jewelry collection can be added to lengths of chain, cord, and more to create jewelry pieces for any occasion. Each connector measures 38 x 29mm and is embellished with sparkling crystal rhinestones. 2 pieces per package.

These fun, bright silver skull jewelry connectors can be added to chain, cord, and more to create jewelry for any occasion. Each skull and cross bone connector is accented with sparkling crystal rhinestones and measures 18 x 10mm each. Pair with other pieces in the Chic & Charmed jewelry collection. 3 pieces per package.

Jewelry knot covers are also known as bead tips, bead tip fold overs or calottes. These knot cover connectors are perfect for hiding and protecting knots while also providing a secure connection to jump rings, clasps, and other jewelry findings. 60 pc per package.

Add the finishing, professional touch to your design with End Caps. End Caps are open on one side to accomodate the memory wire end. Use end caps with rings to dangle charms or just about anything to add to your design.

Add the finishing, professional touch to your design with End Caps. End Caps are open on one side to accomodate the memory wire end. Use end caps with rings to dangle charms or just about anything to add to your design.

Add the finishing, professional touch to your design with End Caps. End Caps are open on one side to accomodate the memory wire end. Use end caps with rings to dangle charms or just about anything to add to your design.

Bracelet connectors with a loop on both ends to connect chain or beads.

1/2 inch closed, gold colored, metal rings are just the right size to use as connectors when creating or replacing key chains, charm bracelets, necklaces, bracelets, earrings, etc. Each ring has an outside diameter of 1/2" and is approximately 1/16" thick. All rings have a welded seam which gives them additional strength and endurance.

Seamless gold colored metal rings are just the right size to use as connectors when creating or replacing key chains, charm bracelets, necklaces, bracelets, earrings, etc. Each high quality ring has an inside diameter of 1/2", outside diameter of 3/4", and is approximately 1/8" thick. 20 pc per package.

Seamless silver colored metal rings are just the right size to use as connectors when creating or replacing key chains, charm bracelets, necklaces, bracelets, earrings, etc. Each high quality ring has an inside diameter of 1/2", outside diameter of 3/4", and is approximately 1/8" thick. 20 pc per package.

Give your seed bead designs a luxurious yet secure finishing touch with these end tubes. Finish off seed bead projects with these tube ends. Simply insert end of seed bead project into opening and gently squeeze together with a pair of pliers and bend sides. Measures 15 mm wide. Click on the alternate photo for an example of this tube being used.

Finish off seed bead woven projects with these tube ends. Simply insert end of woven project into opening and gently pinch with a pair of pliers and bend sides. Measures 15 mm wide. Give your seed bead designs a luxurious yet secure finishing touch with these end tubes.

Give your seed bead designs a luxurious yet secure finishing touch with these end tubes. Finish off seed bead projects with these tube ends. Simply insert end of seed bead project into opening and gently pinch with a pair of pliers and bend sides. Measures 20 mm wide. Click on the alternate photo for an example of this tube being used.

Give your seed bead designs a luxurious yet secure finishing touch with these end tubes. Finish off seed bead projects with these tube ends. Simply insert end of seed bead project into opening and gently pinch with a pair of pliers and bend sides. Measures 20 mm wide. Click on the alternate photo for an example of this tube being used.

Gives your seed bead designs a luxurious yet secure finishing touch with these end tubes. Finish off seed bead projects with these tube ends. Simply insert end of seed bead project into opening and gently pinch with a pair of pliers and bend sides. Measures 20 mm wide. Click on the alternate photo for an example of this tube being used.

These 3-inch silver-tone necklace and bracelet chain extenders feature a secure lobster clasp on one end, allowing you to quickly add up to 3 inches of extra length to necklaces, bracelets, anklets and other jewelry. Simply attach the lobster clasp to your jewelry and fasten your existing clasp anywhere along the extender chain to create the perfect fit. Each package contains 4 chain extenders.

Also called necklace extensions, bracelet extenders, chain extenders, bracelet lengthener or necklace lengtheners, these handy accessories make it easy to adjust jewelry that's just a little too short. The extender for chain can be attached or removed in seconds without permanently altering your favorite jewelry.

Perfect for necklaces, bracelets, chokers, anklets and handmade jewelry, these lobster clasp extenders provide a simple solution for improving comfort, accommodating different necklines or clothing styles, and making jewelry easier to wear. They are also useful when replacing a missing extender or adding flexibility to handmade jewelry designs.

These 3-inch gold-tone necklace and bracelet chain extenders feature a secure lobster clasp on one end, allowing you to quickly add up to 3 inches of extra length to necklaces, bracelets, anklets and other jewelry. Simply attach the lobster clasp to your jewelry and connect your existing clasp anywhere along the extender chain to create the perfect fit. Each package contains 4 removable gold chain extenders. (Note: Chains may vary slightly in length)

Also called gold necklace extensions, bracelet extenders, chain extenders, necklace lengtheners or jewelry lengtheners, these versatile accessories make it easy to lengthen jewelry that is just a little too short without making permanent changes. Remove the extender whenever the extra length is no longer needed.

Ideal for extending necklaces, bracelets, chokers, anklets and handmade jewelry, these lobster clasp extenders are also useful for replacing a missing extender, creating a more comfortable fit or adapting jewelry to different necklines and clothing styles. Keep a few on hand for jewelry repairs, craft projects and everyday wear.

Can be used for all types of cords, leather necklaces, Kumihimo bracelets, etc. Measures approx 14 mm including the top loop. Loop measures 6mm wide on outside and 3mm wide inside. The cord closure is approx 8mm long. For use with 3-6mm cords.

Design elegant bracelets, earrings, necklaces, and more with these pretty gold open oval connectors. Each oval has crystal rhinestone accents and measures 40 x 13mm. Pair with other pieces in the Chic & Charmed jewelry collection to create handmade jewelry for any occasion. 3 pieces per package.

Design elegant jewelry with these gold oval connectors embellished with sparkling crystal rhinestones. Each connector measures approximately 10 x 21mm and has two holes for chain, cord, and more. Pair with other pieces in the Chic & Charmed jewelry collection to create pretty handmade jewelry for any occasion. 3 pieces per package.

Black parachute cord buckles in a smaller size - ideal for children's or women's bracelets. 12mm. Side release. Each end can fit up to 4 strands or 550 parachute cord.Each package contains 1 of each color: Red, pink, green, blue, purple and black. 6 pieces per package.

Gold-tone cross jewelry connectors sparkling with clear rhinestones and designed with a loop at both the top and bottom. Each cross measures approximately 24.5 x 36.5mm, giving you two connection points for attaching chain, cord, beaded strands, jewelry findings or other components. The cross becomes part of the jewelry design rather than simply hanging from it, making these especially useful as bracelet connectors and decorative focal links. 3 cross connectors per package.

Create a sideways cross bracelet by attaching chain, cord or beaded strands to both ends, or work the cross into other Christian and religious jewelry designs. These connectors can also be used vertically in a necklace: attach the top loop to the necklace and turn the lower loop into a decorative dangle with a crystal, pearl, birthstone bead, small charm or other accent. Try them as necklace connectors, pendant connectors or focal connector findings when you want the cross to become an integral part of your jewelry design.

These sweet, opaque pink rhinestone jewelry connectors from the Chic & Charmed jewelry collection can be added to lengths of chain, cord, wire, and more to design elegant jewelry for any occasion. Each pink rhinestone is set in bright gold and measures 14 x 21mm. 3 pieces per package

These sweet, opaque aqua blue rhinestone connectors from the Chic & Charmed jewelry collection can be added to lengths of chain, cord, wire, and more to design elegant jewelry for any occasion. Each pink rhinestone is set in bright gold and measures 14 x 21mm. 3 pieces per package

These bolo tie tips have a tapered ribbed design with a loop at the bottom that can be used to add a stylish dangle to your custom bolo tie. These tips also double as jewelry end caps, as earrings by adding a fish hook or any other earring finding to the loop.
Each bolo tip measures approximately 3/4 inch long including loop by 1/4 inch wide at opening with an approximate 1/8 inch hole diameter.

These ribbon end fastener clamp feature a textured surface and small teeth for secure grip. They are great for finishing the ends of ribbon, lace, leather or fabric stringing material up to 9 mm wide. Use flat nose pliers to close the ribbon crimps and they will hold your beads, ribbon and/or cording in place with their internal teeth and hide frayed ribbon ends. Crimp measures 8mm wide, 6mm tall (without connector hole) and 8mm tall with connector hole.

These ribbon end fastener clamp feature a textured surface and small teeth for secure grip. They are great for finishing the ends of ribbon, lace, leather or fabric stringing material up to 12 mm wide. Use flat nose pliers to close the ribbon crimps and they will hold your beads, ribbon and/or cording in place with their internal teeth and hide frayed ribbon ends. Crimp measures 10mm wide, 6mm tall (without connector hole) and 8mm tall with connector hole.

These ribbon end fastener clamp feature a textured surface and small teeth for secure grip. They are great for finishing the ends of ribbon, lace, leather or fabric stringing material up to 12 mm wide. Use flat nose pliers to close the ribbon crimps and they will hold your beads, ribbon and/or cording in place with their internal teeth and hide frayed ribbon ends. Crimp measures 10mm wide, 6mm tall (without connector hole) and 8mm tall with connector hole.

These ribbon end fastener clamp feature a textured surface and small teeth for secure grip. They are great for finishing the ends of ribbon, lace, leather or fabric stringing material up to 16 mm wide. Use flat nose pliers to close the ribbon crimps and they will hold your beads, ribbon and/or cording in place with their internal teeth and hide frayed ribbon ends. Crimp measures 13mm wide, 6mm tall (without connector hole) and 8mm tall with connector hole.

These ribbon end fastener clamp feature a textured surface and small teeth for secure grip. They are great for finishing the ends of ribbon, lace, leather or fabric stringing material up to 16 mm wide. Use flat nose pliers to close the ribbon crimps and they will hold your beads, ribbon and/or cording in place with their internal teeth and hide frayed ribbon ends. Crimp measures 16mm wide, 7mm tall (without connector hole) and 9mm tall with connector hole.

These ribbon end fastener clamp feature a textured surface and small teeth for secure grip. They are great for finishing the ends of ribbon, lace, leather or fabric stringing material up to 21 mm wide. Use flat nose pliers to close the ribbon crimps and they will hold your beads, ribbon and/or cording in place with their internal teeth and hide frayed ribbon ends. Crimp measures 20mm wide, 6mm tall (without connector hole) and 8mm tall with connector hole. Goldtone

These ribbon end fastener clamp feature a textured surface and small teeth for secure grip. They are great for finishing the ends of ribbon, lace, leather or fabric stringing material up to 21 mm wide. Use flat nose pliers to close the ribbon crimps and they will hold your beads, ribbon and/or cording in place with their internal teeth and hide frayed ribbon ends. Crimp measures 20mm wide, 6mm tall (without connector hole) and 8mm tall with connector hole.

These ribbon end fastener clamp feature smooth, non-textured surface and small teeth for secure grip. They are great for finishing the ends of ribbon, lace, leather or fabric stringing material up to 16 mm wide. Use flat nose pliers to close the ribbon crimps and they will hold your ribbon and/or cording in place with their internal teeth and hide frayed ribbon ends.

These ribbon end fastener clamp feature smooth, non-textured surface and small teeth for secure grip. They are great for finishing the ends of ribbon, lace, leather or fabric stringing material up to 16 mm wide. Use flat nose pliers to close the ribbon crimps and they will hold your beads, ribbon and/or cording in place with their internal teeth and hide frayed ribbon ends. Crimp measures 16mm wide, 8mm tall (without connector hole) and 11mm tall with connector hole.

Craft beautiful bracelets and necklaces with these round rondelle rhinestone spacer beads. Each bead measures 6mm in diameter by 3mm thick and can be interspersed with colorful pieces to add a striking dimension to your creations. 6 pcs per package

Use these pretty gold medallion jewelry connectors to design elegant bracelets, earrings, necklaces, and more. Each medallion connector has pretty filigree and a crystal rhinestone accent. Each bracelet connectors measure 26 x 32mm. 3 pieces per package.

Use these pretty silver medallion jewelry connectors to design elegant bracelets, earrings, necklaces, and more. Each medallion connector has pretty filigree and a crystal rhinestone accent. Each bracelet connectors measure 26 x 32mm. 3 pieces per package.

Separator bar with 2-holes. Lead Free. Nickel Free. Antique Silver Look. Bars measure 20mm long, 4mm wide and 4mm thick.

Design fun jewelry pieces for any occasion with these sweet heart connectors from the Chic & Charmed jewelry collection. Each faceted Silver heart measures 18 x 16mm and has two loops for adding chain, cord, findings, and more. 4 pieces per package.

These silvertone, bezel set rhinestone connector links feature round, sparkling crystal rhinestones. Each decorative connector link measures 14mm and can be used to make pretty necklaces, earring dangles, bracelets, and more. Pair with other pieces in the Chic & Charmed jewelry collection to create elegant, handmade jewelry perfect for any occasion. 4 pieces per package.

These fun, bright gold skull jewelry connectors can be added to chain, cord, and more to create jewelry for any occasion. Each of the skull and cross bone bracelet connectors is accented with sparkling crystal rhinestones and measures 18 x 10mm each. 3 pieces per package.

Each bow is 11mm wide and 5mm tall. Perfect for use with a double strand necklace or bracelet as a unique spacer bar. Add to jewelry projects as a connector, use as a spacer bead or glue onto your project.

Separator Bar with three holes - Lead and Nickel Free. Each piece measures 11mm from end to end, 3.5 mm from side to side and 5mm thick from front to back.

Spacer bar with 4 Crystal Rhinestones and 3 hole guides. Bars measure 13mm long, 3mm wide, 6mm thick

12mm Silvertone Split Rings - For jewelry making and use as connectors.

12mm Silvertone Split Rings - 144 pcs per package

These gold, square jewelry connectors have a hole on 2 opposite sides making it easy to thread and showcase your favorite stone, charm, pendant or bead. Each square is 2mm thick and measures 15mm wide on the outside and 11mm on the inside of the square. Lead and nickel free.

These antique silver, square jewelry connectors have a hole on 2 opposite sides making it easy to thread and showcase your favorite stone, charm, pendant or bead. Each square is 2mm thick and measures 18mm wide on the outside and 14mm on the inside of the square. Lead and nickel free.

These shiny silver, square jewelry connectors have a hole on 2 opposite sides making it easy to thread and showcase your favorite stone, charm, pendant or bead. Each square is 2mm thick and measures 19mm wide on the outside and 15mm on the inside of the square. Lead and nickel free.

Enhance your necklace or bracelet with this gorgeous, unique, 18mm square, machine cut, transparent crystal jewelry connector with 2 holes. Holes are across from each other on opposite sides. Each side is faceted to bring in the most light and refraction. Use jump rings to connect this square to your jewelry piece.

7 Prong bead caps with loop for jewelry making. Dress up your beads with these beautiful bell caps.
* Discontinued item. Limited Supply Available

Incorporate these beautiful zinnia jewelry connectors into your favorite jewelry project. 19mm Across, 26mm from connector loop to connector loop
* Discontinued item. Limited Supply Available

10mm, silver, end connectors. 10 pieces per package.
* OUT OF STOCK 

18mm 3-hole metal bar, silver, spacer beads for jewelry making.
* OUT OF STOCK 

15mm standard side release parachute cord buckles in titanium gray. 4 pieces per package.
* OUT OF STOCK 

These bolo tie tips have a tapered ribbed design with a loop at the bottom that can be used to add a stylish dangle to your custom bolo tie. These tips also double as jewelry end caps, as earrings by adding a fish hook or any other earring finding to the loop.
Each bolo tip measures approximately 3/4 inch long including loop by 1/4 inch wide at opening with an approximate 1/8 inch hole diameter.
* OUT OF STOCK 

Silver-tone cross jewelry connectors accented with sparkling clear rhinestones and a connecting loop at both the top and bottom. Each cross measures approximately 24.5 x 36.5mm and provides two attachment points for chain, cord, beaded strands, jewelry findings and other components. Use these decorative connectors for jewelry as the focal link in a bracelet or anywhere you want the cross incorporated directly into the jewelry design. 3 silver-tone cross connectors per package.

Create a Christian bracelet by connecting chain, beads or cord to both ends of the cross, or combine the connectors with other religious and faith-inspired jewelry findings. For another look, use one vertically as a pendant connector: attach the necklace at the top and hang a birthstone bead, crystal, pearl, charm or other decorative dangle from the lower loop. These versatile jewelry-making connectors can also become necklace connectors, bracelet focal pieces and components for personalized Christian gifts.

Spacer bar with 4 Crystal Rhinestones and 3 hole guides. Bars measure 13mm long, 3mm wide, 6mm thick